LILYGO® T5 4.7 inch E-paper Screen ESP32 V3 Version 16MB FLASH 8MB PSRAM WIFI Bluetooth Display Module – 18650 holder

LILYGO® T5 4.7 inch E-paper Screen ESP32 V3 Version 16MB FLASH 8MB PSRAM WIFI Bluetooth Display Module – 18650 holder

Feature:
LILYGO T5 4.7-inch E-Paper is another version of the T5 series of electronic ink screens.
The T5 series of ink screen versions include 1.02, 1.54, 2.13, etc., from small to large electronic ink screen versions.
We have been committed to low-power design optimization. This 4.7-inch version continues the low-power design, the sleep mode current is about 170uA, and two optional battery modes are designed on the back.
One is PH 2.0 pitch 2pin interface, and the other is 18650 battery metal connector. Two power supply modes for you to choose.
A 6pin touch screen interface is reserved as an optional accessory to facilitate your application.
There are 5 buttons reserved on the side, 4 of which are custom buttons, which can define functions flexibly. One is the reset button.

LILYGO T5 4.7 inch E-Paper motherboard parameters:
-ESP32-WROVER-E (ESP32-D0WDQ6 V3)
-16MB FLASH
-PSRAM 8MB
-USB to TTL CP2104
- 4.7 inches, 540(H)X960(V) resolution, 16 Gray Level ED047C1, and supports partial refresh.
-960X540 resolution 8-bit parallel port 4.7 inch ink screen
-4pin 2.0 molex 4 p 53015-0410 X3
-RST button X1
-Custom button X4
-TYPE-C
-Battery holder PH 2.0 pitch
-18650 battery metal connector
-6pin FPC touch screen expansion connector
-Battery charge and discharge protection chip
-USB input power 5V@1A
-4pin expansion interface output is 3.3V
-Sleep mode current@~170uA
Develop software:
-arduin0
-IDF
-Micropython
Application scenario:
-Desktop weather station
-STEM Education
-IOT device