Xiaomi Redmi Note 10 Pro 6GB 128GB Smartphone 120Hz AMOLED Display 108MP Camera Snapdragon 732G 5020mAh 33W NFC

Dimensity 1100
CPU architecture process: Cortex A78 architecture, 6nm process
CPU frequency: three-cluster eight-core processor, the highest frequency can reach 2.6GHz
GPU: 9-core ARM Mali graphics processor with a maximum frequency of 836MHz
AI: 6-core APU3.0

Size: 6.6 inches
Type: LCD screen
Resolution: 2400 x 1080 (FHD+)
Display frame rate: 120Hz six-speed transmission
Touch sampling rate: 240Hz
Brightness: 450nit (typical value)
DCI-P3 high color gamut丨intelligent brightness adjustment|Sunshine screen| Luminous screen| Classic eye protection mode| Paper eye
protection mode (full color mode, light color mode, black and white mode)
Corning ® Gorilla ® Glass Victus ™

Network frequency band

SA/NSA dual-mode丨dual-cards丨full Netcom 7.0
supports dual-cards, unlimited operators, both primary and secondary cards can use 5G
Support Dual Nano-SIM card slot, dual-card operators can not in 5G network ①
Support Mobile / Unicom / Telecom 5G / 4G / 3G / 2G ②
support 5G dual-card dual-mode SA / NSA (Sub-6G) ③
Support Dual SIM VoLTE HD Voice ④
_{Note ①: Whether to support 5G depends on the local operator’s network; when two telecom cards are used, the secondary card can
only be registered on the telecom VoLTE network. If the secondary card or the local network does not support the telecom VoLTE
service, it cannot be used;
Note ②: Not supported TD-SCDMA standard (mobile 3G);
Note ③: Whether SA/NSA is supported depends on the local operator’s network and service deployment. The SA function of the
secondary card is supported through OTA upgrade;
Note ④: It supports the VoLTE service of China Mobile/Unicom/Telecom. The usage depends on the operator’s local network and
service deployment;}

Support frequency band
5G: n1 / n3 / n28A / n41 / n77 / n78
Note: The actual network and frequency band usage depends on the deployment of local operators, n1 and n3 need to be supported by
the operator through software upgrades after release
. n28A (Tx: 703-733MHz, Rx: 758-788MHz)
4G: FDD-LTE: B1 / B2 / B3 / B4 / B5 / B7 / B8 / B18 / B19 / B26
TDD-LTE: B34 / B38 / B39 / B40 / B41 / B42
Note: LTE B41 (2496-2690MHz)
3G: WCDMA: B1 / B2 / B4 / B5 / B6 / B8 / B19;
CDMA EVDO: BC0
2G: GSM : 850/900/1800 / 1900MHz; CDMA 1X: BC0

WLAN protocol: WiFi 6, WiFi 5, WiFi 4 and 802.11a / b / g
WLAN frequency: support 2.4G WiFi, 5G WiFi ｜support WiFi Direct ｜support WiFi Display